智能高分子膜材

本文介绍了智能高分子膜的概念。结合分离膜和ＬＢ膜实例，探讨了智能高分子膜的特性及其潜在应用前景。     

A novel experimental technique to determine the heat transfer coefficient between the bed and particles in a downer

A novel method for directly measuring the temperature history of mobile hot ferromagnetic particles (steel particles), substituting for reacting particles, in a binary-solid (reacting particles and inert particles) downflow is introduced. The temperature history of the hot steel particles can be obtained by measuring the temperature of the particles at different axial positions using magnetic fields that can separate the steel particles from other bed materials immediately and easily. Employing the magnetic marking method, magnetic sensors were used to detect the change in magnetic flux density in a given magnetic field, and the residence time of the steel particles was also measured. The cross-sectional averaged particle-to-bed heat transfer coefficients were calculated from the experimental results using simple heat balance equations. The measured temperature data have a relatively wide error range; however, the average temperature curves derived from the average particle-to-bed heat transfer coefficients agreed with the temperature plots. Therefore, the experimental method of this study is applicable to the measurement of the particle temperature in a binary-solid downflow. The results showed that there is strong correlation between the particle-to-bed heat transfer coefficients and normalized collision frequency under the laminar gas flow conditions.     

New type of pressurized cultivation method providing oxygen for piezotolerant yeast

For efficient oxygen supply to pressurized culture, we developed a method using a highly pressurized membrane reactor with an air-saturated medium circulation system. The new method increased the cell growth of aerobic yeast approximately 20 folds larger than that in the case of using a conventional method.     

Ruthenium (II) complexes with π expanded ligand having phenylene–ethynylene moiety as sensitizers for dye-sensitized solar cells

Ruthenium(II) complexes by introducing phenylene–ethynylene subunit into a tpy (tpy=2,2′:6′,2″-terpyridine) ligand were newly synthesized, and their photophysical and photochemical properties were characterized. The molar extinction coefficients of these dyes were larger than that of black dye. The photovoltaic performances of the solar cells based on these synthesizing dyes were investigated under AM 1.5 irradiation (100 mW cm^?2). The conversion efficiencies of 1a and 1b were 5.7% and 2.4%, respectively.     

A Hysteresis Model of Soil Water Retention Curves Based on Bounding Surface Concept

This paper presents a hysteresis model of soil water retention curves based on bounding surface concept. In the bounding surface concept, the plastic modulus is defined as a function of the distance between a current stress point and the conjugated stress point on the bounding surface. We adopt the similar idea that the slopes c (=??S_r/?s) of soil water retention curves are defined as a function of the normalized distance between a current point and the conjugated points on main curves (main drying and wetting curves). The modeling of main curves was conducted by Tangential model proposed by the author. Tangential model insures the continuity of slopes of soil water retention curves. The model may well trace the soil water retention curves as if pore water pressures are both positive and negative. The model needs not to identify the parameters. Only three points are selected and the values of degree of saturation S_r, suction s and slope c at the points are input. Soil water retention curves for three samples with cycles of drying and wetting were simulated using the model. The simulation results showed good agreements with the experimental ones.     

Type IIa RPTPs and Glycans: Roles in Axon Regeneration and Synaptogenesis

Type IIa receptor tyrosine phosphatases (RPTPs) play pivotal roles in neuronal network formation. It is emerging that the interactions of RPTPs with glycans, i.e., chondroitin sulfate (CS) and heparan sulfate (HS), are critical for their functions. We highlight here the significance of these interactions in axon regeneration and synaptogenesis. For example, PTPσ, a member of type IIa RPTPs, on axon terminals is monomerized and activated by the extracellular CS deposited in neural injuries, dephosphorylates cortactin, disrupts autophagy flux, and consequently inhibits axon regeneration. In contrast, HS induces PTPσ oligomerization, suppresses PTPσ phosphatase activity, and promotes axon regeneration. PTPσ also serves as an organizer of excitatory synapses. PTPσ and neurexin bind one another on presynapses and further bind to postsynaptic leucine-rich repeat transmembrane protein 4 (LRRTM4). Neurexin is now known as a heparan sulfate proteoglycan (HSPG), and its HS is essential for the binding between these three molecules. Another HSPG, glypican 4, binds to presynaptic PTPσ and postsynaptic LRRTM4 in an HS-dependent manner. Type IIa RPTPs are also involved in the formation of excitatory and inhibitory synapses by heterophilic binding to a variety of postsynaptic partners. We also discuss the important issue of possible mechanisms coordinating axon extension and synapse formation.     

Niobium–aluminum oxynitride prepared by ammonolysis of oxide precursor obtained through the citrate route

Oxynitrides in the (Nb_1−xAl_x)(O,N) quaternary system were prepared by ammonolysis of oxide precursor obtained through the citrate route. The products at 1000 °C were a mixture of Nb(N,O) and NbN_0.95 at the niobium end (x = 0) and amorphous Al(O,N) at the aluminum end (x = 1). A new cubic compound (A) appeared mixed with Nb(N,O) in the compositional range 0.1 ≤ x ≤ 0.4. Its almost pure product was obtained at x = 0.5. The X-ray diffraction pattern was rock salt type (Nb_0.56Al_0.44)(O_0.38N_0.37□₀₂₅) in F_m−3m with a = 0.43481(1) nm. The product showed superconductivity with T_c = 15 K. Its crystallinity was much improved and its superconducting volume fraction increased to 32% after its thermal annealing at 1100 °C in evacuated sealed tube. A second cubic compound (B), rock salt type Nb[(O,N)_0.85□_0.15] with a = 0.434 nm, was observed mixed with amorphous Al(O,N) in the as-prepared products of the range 0.6 ≤ x ≤ 0.9.     

球状碳酸钙的合成研究

文章探讨了用工业氯化钙和纯碱制备球状碳酸钙的适宜工艺 ,通过正交实验 ,研究了反应温度、溶液浓度等因素对产品的影响 ,并得到了实验条件的最优组合 ,得到了球状碳酸钙。研究结果表明 :加入反应缓冲剂及结晶生长停止剂是合成球状碳酸钙的关键     

Characterisation of volatile sulphur-containing compounds generated in crushed leaves of Chinese chive (Allium tuberosum Rottler)

To characterise the composition of sulphur-containing constituents in Chinese chive (Allium tuberosum Rottler), GC–MS and HPLC analyses were carried out, using 12 varieties of Chinese origin, 4 varieties of Japanese origin and 6 commercially available cultivars. Five disulphides (dimethyl, allyl methyl, methyl 1-(E)-propenyl, diallyl, and allyl 1-(E)-propenyl), two trisulphides (dimethyl and allyl methyl), and two vinyldithiins (3-vinyl-[4H]-1,2- and 2-vinyl-[4H]-1,3-) were identified on the basis of their mass spectral and GC-retention data. Among the detected sulphur compounds, sulphides with a methyl group predominated over those with an allyl group. This was supported by the HPLC estimations, suggesting that all cultivars examined had much greater amounts of methiin than alliin. Also, two novel compounds were tentatively identified as [3H,4H]-1,2-dithiin and [2H,4H]-1,3-dithiin on the basis of their mass spectral features, GC-retention data, and some experimental results on their formation in reaction mixtures with different proportions of methiin and alliin. Their formation mechanism was proposed.     

Synthesis temperature of Ba4CuPt2O9 compounds and the influence of their addition on the orientation of the c-axes of fluorine-doped YBCO superconductors

An experimental study has been carried out to investigate the synergistic effect of Ba₄CuPt₂O₉ compounds on the critical current density of fluorine-doped YBCO superconductors. The Ba₄CuPt₂O₉ compounds were synthesized by a solid state reaction. It was found that the synthesis temperature of the Ba₄CuPt₂O₉ compounds was over 800°C, which was higher than that ever reported previously. In addition, the influence of Ba₄CuPt₂O₉ compounds on the critical current density of YBCO superconductors has been investigated using two types of Ba₄CuPt₂O₉ compounds: one is not heat-treated, i.e. source materials; and the other is heat-treated at 950°C. It was found that the former affected the orientation of the c-axes, but the latter did not have an influence on the orientation of the c-axes, but adversely affected the superconductivity of samples quenched at temperatures above 850°C.